Nobody expects a quiet evening at home to turn into a full-blown water damage emergency. But that’s exactly what happened at a two-story home in Severance, CO when a drain backup in the master bathroom sent water spreading through the upper level and down into the floor below. Our team at Emergency Service Pros got the call, and within hours we were on site, doing what we do. If you’ve ever wondered what water damage restoration actually looks like from the inside, this one’s a good example.
How a Drain Backup Became a Multi-Room Problem
Drain backups are sneaky. The visible water is just the beginning. When this homeowner noticed the backup in the master bathroom, the damage had already started moving. Water doesn’t wait. It follows gravity, soaks into carpet padding, wicks up drywall, and travels along subfloor seams to rooms that weren’t anywhere near the source.
By the time we arrived, moisture had migrated well beyond the bathroom itself. The master bedroom carpet was saturated. The closet was affected. The upstairs hallway showed elevated readings. And on the lower level, water had tracked down through the structure and was already hiding in the walls and flooring below.
This is why the first thing we do on every job is a full inspection, not just a visual scan.
Day 1: Finding What the Eye Can’t See
Josh Patterson led the initial inspection using two tools that are essential on any serious water loss: a FLIR thermal imaging camera and moisture meters. The thermal camera picks up temperature differentials in walls and floors that indicate hidden moisture. The moisture meters give us actual readings, so we know exactly how saturated a surface is and whether it needs to come out.
According to IICRC S500 standards, a thorough moisture mapping process like this is considered best practice for any water damage response. It’s not optional. Guessing at where moisture traveled is how you end up with mold problems six weeks later.
Here’s what the inspection confirmed was affected:
- Master bathroom tile flooring, walls, and shower area
- Master bedroom carpet and subfloor, with moisture in the walls
- Master bedroom closet carpet and lower walls
- Upstairs hallway flooring and lower wall sections
- Staircase carpet
- Lower level room walls and flooring
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Day 2: Demo, Containment, and Getting the Drying Started
Once we had a clear picture of what needed to go, we got to work. Protecting the rest of the home comes first. Our team laid heavy plastic sheeting on the staircase and through the main traffic areas to keep dust and debris contained. Doorways got sealed off as work zones. This homeowner could still move around their house without the whole thing feeling like a construction site.
Here’s what came out:
- Carpet and carpet pad in the master bedroom and closet
- Baseboards throughout all affected rooms and the hallway
- Flood cuts in drywall along the lower wall sections of the master bedroom, closet, and lower level room
- Ceiling drywall in one lower level area, where water had tracked down into the structure
- Flooring material in the master bathroom and adjacent areas
Flood cuts, for anyone who hasn’t seen them before, are horizontal cuts made in drywall typically 12 to 18 inches above the floor line. They let air movers dry behind the wall cavity instead of leaving wet material sealed inside. It looks dramatic in the photos, but it’s the right move. Wet drywall left in place is a mold problem waiting to happen.
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Days 3 Through 5: The Drying Process
Once demo was complete, the drying equipment went in. Multiple air movers were positioned throughout the affected rooms, pushing high-velocity air across the exposed subfloor, wall cavities, and framing. A large commercial dehumidifier pulled the moisture-laden air out of the space.
We checked moisture readings on Day 3 and again on Day 5. Day 4 didn’t require a site visit based on the readings, which is normal. When the numbers tell us equipment can keep running without intervention, we don’t make unnecessary trips. On Day 5, readings confirmed the structure was dry and all equipment was removed.
Five days from discovery to dry. That’s how it should go when a team responds fast and documents everything properly. If you’ve had a recent leak and aren’t sure whether the structure behind your walls is truly dry, our mold remediation team can assess for secondary damage too.
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
What Homeowners in Severance Should Know About Drain Backups
Drain backups are more common than most people think, and the damage spreads faster than expected. Here are a few things worth knowing:
- Water travels through floors fast. Tile and hardwood may look fine on the surface while the subfloor underneath is soaked.
- Don’t wait on a “small” backup. Even a single backup event can saturate structural materials within hours.
- Mold can start forming within 24 to 48 hours in wet materials, according to the EPA’s guide on mold and moisture.
- Insurance claims move better with documentation. Our moisture mapping and daily progress photos create a clear record for your adjuster.
If you’re curious about what to watch for after any water event, our post on signs of hidden water damage behind walls is a good read. And if you want to understand the full cost picture before you call, this breakdown of water damage repair costs in Northern Colorado covers it well.
Dealing With a Water Emergency in Northern Colorado?
Our team at Emergency Service Pros responds 24/7 with a 60-minute response time. We bring the equipment, the expertise, and the documentation your insurance company needs. Don’t wait on water damage.























